Samsung Galaxy S21 FE 5G EDL Point is a hardware-specific ISP pinout or test point used to enter the device into the EDL mode (9008) for flashing firmware, unlocking, or repairing. If your Samsung Qualcomm phone is bricked, you have forgotten the pattern lock, or you cannot unlock FRP, then the Samsung Galaxy S21 SM-G990B, SM-G990EEDL Test Point can help you quickly fix it.
What is Samsung Galaxy S21 FE EDL Mode
The EDL mode (Emergency Download Mode) can connect Qualcomm Android phones to computers via the Qualcomm HS-USB QDLoader interface. To boot into the EDL mode, you must short two test points on the device’s motherboard or use a unique tool to which the device’s bootloader has granted permission. Nowadays, Android devices manufactured by Qualcomm come with locked USB drives and bootloaders. Without authorization, the device cannot be booted into Download mode. To boot into the EDL (Emergency Download Mode), you must use the EDL Point.Samsung Galaxy S21 FE EDL Point (Test Point) ISP Pinout Image
Rebooting Samsung Galaxy S21 FE into EDL Mode 9008
- On your computer, download and extract the Qualcomm USB Driver
- Download and install the Qualcomm USB driver
- Turn off your Qualcomm Android device by pressing the power button
- Take off the phone’s back cover
- Check out the image below
- The EDL PinOUT/Test Point can be found on the circuit board of your phone
- To short that pinout, you need copper wire or tweezers
- Connect your smartphone to the PC using a USB cable once you’ve finished
- That’s it,
- You can now use any unlocking or flashing tool for Qualcomm to fix your phone.
Uses Of Samsung Galaxy S21 FE Test Point
- Reviving a bricked device through firmware flashing
- Overcoming FRP lockout after factory reset
- Unlocking the device after forgetting the pattern lock
- Installing custom firmware for improved performance and customization
- Debugging and testing hardware and software for issue resolution by technicians and developers.
Other Ways to Enter EDL Mode on Samsung Galaxy S21 FE
Follow the instructions below carefully to boot your device into EDL Mode (aka Emergency Download Mode)Using Adb Mode
- First, install ADB & Fastboot driver on the PC and then turn on USB debugging on your phone.
- Now connect your device with a PC using a USB Driver.
- Then open a command window on your PC, paste the following commands, and hit enter.
adb reboot edl
- If any pop-up appears on the phone screen, then allow ADB access.
Fastboot mode
- Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive)
- Boot your device into the bootloader
- Open the command window on your PC on the same folder extracted (ADB and Fastboot Tool)
- now enter the command
.\fastboot oem edl
