Xiaomi Poco X5 Pro EDL Point (Test Point) Reboot to EDL Mode 9008
If you Work as a mobile technician and encounter problems with the Poco X5 Pro smartphone, such as bricking, pattern lock loss, or Google account verification failure after a hard reset. This detailed guide can help you quickly overcome these difficulties.
Xiaomi, Mi, Redmi, POCO smartphones, and other devices use EDL (Emergency Download) points, also known as test points. It is a physical point on the device’s motherboard that, when shorted or connected, forces the device to boot into EDL mode (Emergency Download Mode). This mode allows users to flash firmware, unbrick a device, or bypass security features like FRP (Factory Reset Protection) when standard methods fail.
You may need to disassemble the phone to access the Test Point Pinout. This involves removing the back cover, disconnecting the battery, and potentially removing other components to reveal the motherboard. Disassembling your phone risks damaging the device if not done correctly and may void the warranty.
When locating the test point, refer to pictures or diagrams designed explicitly for your Xiaomi Poco X5 Pro model, as the location of the EDL point may vary between different devices. These images will guide you in identifying the correct test point on the motherboard, ensuring you do not accidentally shorten the wrong components.
What Is Xiaomi Poco X5 ProTest Point or EDL Mode?
If you are a newbie user, then probably EDL mode may be a new word for you. But if you are involved in rooting and flashing firmware, then absolutely not.
In short, EDL mode is also known as an emergency mode for mobile. Technically all the Samsung devices did not come with the EDL mode option. If you want to install or update your Xiaomi phone, you can flash new stock ROM using download Mode or odin mode. Both methods have limitations. Stock ROM can be used only to update the higher version, and you can’t downgrade the Xiaomi version.
Just boot the device into EDL or emergency downloading mode and flash fastboot rom /firmware using the Mi flash tool. It will fix all existing errors, or you can recover your dead phone again.
Boot Xiaomi Poco X5 Pro Into EDL Mode (Test Point) PINOUT
So how to boot the device into EDL mode? Well, there is more than one method to reach EDL. The simplest one is getting a modified USB cable and following the key combo method. When the device is switched off, press and hold the Volume Up & Down buttons together and connect the device to the PC using the modified cable.
Another way to boot your Xiaomi Poco X5 Pro to EDL mode is by sorting two test points. These test points are available on the right side from the rear view (after dissembling the back panel). After sorting two test points, the device should boot into EDL mode. Connect the device to your Windows PC and open the device manager to check for that. It will show up as Qualcomm HS-USB QDLoader 9008 or QHUSB_BULK.
Find EDL Mode For Xiaomi Poco X5 Pro
- Power off the device if possible.
- Open the back cover of the dead Xiaomi Poco X5 Pro. [You may do Google to tear down Poco X5 Pro at home]
- Once you can remove the back cover, disconnect the battery connector first. Battery not required for EDL mode.
- Now make a jumper to visible the edl points of Xiaomi Poco X5 Pro as shown below.
- Now EDL mode or Xiaomi Poco X5 Pro edl test points are in front of you. And you can use them to install the firmware on without unlocking the bootloader.
So, guys, this is all about Nothing Phone 1 emergency downloading or edl mode. Now you can find the Xiaomi Poco X5 Pro EDL test point easily.
Other Ways to Enter EDL Mode on Xiaomi Poco X5 Pro
Follow the instruction below carefully to boot your device into EDL Mode (aka Emergency Download Mode)
By Shorting Hardware Test Points
In that case, you only have one option: short the test points on your device’s mainboard.
- Power off the device if possible.
- Open the back cover of the phone
- Short the 2 test points on your device’s mainboard
- And then plug the USB into your PC
- Once your Qualcomm Android device has entered EDL mode, you can connect it to the PC and use tools like the MSM Download tool to flash firmware files to unbrick or restore stock ROM.
Using Adb Mode
- First, install ADB & Fastboot driver on PC and then turn on USB debugging on your phone.
- Now connect your device to a PC using a USB Driver.
- Then open a command window in PC, paste the following commands, and hit enter.
adb reboot edl
- If any pop-up appears on the phone screen, then allow ADB access.
Fastboot mode
- Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive)
- Boot your device into the bootloader
- Open the command window on your PC on the same folder extracted (ADB and Fastboot Tool)
- now enter the command
.\fastboot oem edl
Note: It’s just to understand that EDL mode flashing is a universal method for all Xiaomi devices. But EDL booting process may be different for different devices. For some devices, you can use the EDL boot command, but the problem is that nowadays, edl command doesn’t work for all the latest Xiaomi smartphones. So the test point is the easiest and perfect method to boot any Vivo phone into EDL mode using test terminals.
