Oppo A12 Backlight Ways | Repair Display Light Problem
This page offers fixes for the display light and backlight problems with the Oppo A12. The Oppo A12 LCD display may have been damaged if your phone’s display has issues like poor lighting or a non-functioning screen. It can be fixed by swapping out the broken LCD for a working one. But, alternative repair options can be required if the Oppo A12 screen is flickering, dim, or has no backlight.
The Oppo A12 backlight issue typically manifests as a lack of display on the LCD screen, resulting in a white screen. Despite this, the phone may still produce ringing and notification sounds. This indicates that the problem lies with the LCD screen’s backlight, not the phone’s audio components.
What Is An LCD Or Backlight For A Oppo A12 ?
The LCD or backlight of your phone’s Oppo A12 is a crucial part of the display system. You may interact with your phone visually by tapping icons, watching films, playing games, etc. on the LCD (liquid crystal display). The LCD must be functioning properly otherwise the display will not be accurate. The LCD screen is illuminated by the backlight, which is made up of a number of LED lights and keeps the display visible even in dim lighting.
Oppo A12 Backlight Ways Display Light Problem Solution
To repair the Oppo A12 dark screen backlight issue, the first step is to replace the display screen module. This will help determine if the backlight LED’s on the LCD are still functional or have been damaged.
You can check the LEDs with a multimeter to further narrow down the problem, being careful not to harm the LCD flex connector. Refer to the remedies provided and find the necessary components on the PCB board if the freshly installed LCD still displays the same issue and the LED light is off.
Possible Oppo A12 Backlight Issues:
- White Screen
- No Display
- Display with Lines
- Dim Screen
- No Backlight.
If you experience any of the above-mentioned symptoms, you can try the following repair steps to fix the damage.
1. Change or Replace Screen: If you have a damaged screen, such as cracks or breaks, replacing the LCD part with a new, functional one is a possible solution.
2. Check Display Lines and Socket: If your Oppo A12 backlight is damaged due to water damage, you may need to disassemble the phone and check the display lines and socket for any corrosion or rust. Cleaning any corrosion and repairing any broken paths with a jumper method can help fix the issue.
3. Check and Replace Internal Components: If the LCD and display lines are in good condition, but you are still experiencing backlight damage, it is possible that the problem lies with internal components. Consult a guide, such as one provided by Mobilerdx Team, to help diagnose and repair the issue.
Check each component for defects. If a component is found to be defective, replace it with a matching type and value. Inspect the diodes and marked coil components on the diagram image, as these are often the cause of backlight display problems when damaged.
