If you are a mobile technician and searching for the Xiaomi Redmi 9A charging ways or not charging issue, then this guide is for you. Follow this troubleshoot to fix the charging-related problem on Xiaomi Redmi 9A.
When a premium device like the Xiaomi Redmi 9A Charging Problem, the Charging ways solution the problem can be with the hardware and its accessories, or it could be just a minor issue with the firmware. As an owner, you should do some troubleshooting procedures to determine what the issue is and hopefully be able to fix it.
A solution in this post is for How to Repair Xiaomi Redmi 9A charging ways not charging problem repair solution, and give you suggestions on resolving this problem with your phone. For example, you will be unable to charge your phones using the phone’s direct USB chargers, the universal charger usage becomes impossible when you use a phone powered by an inbuilt battery.
You are probably enjoying the Xiaomi Redmi 9A with many powerful features of this high-end smartphone. One of the nicest features of the Xiaomi Redmi 9A is its battery, which is either a 5000 mAh battery depending on the exact model. This gives the phone a usage time of between 27 and 31 hours, and a standby time of 3.5 to 4.0 days (depending on app usage, network signal strength, use of WiFi, and many other factors.) However, some users have complained that their Redmi Note 5 Pro does not charge quickly enough.
Hardware Reasons for Xiaomi Redmi 9A Charging Problem
There are four basic hardware-related reasons that your Xiaomi Redmi 9A could be charging slowly, and I will explain each of them in turn and in order of increasing probability. The issue could be:
- There is dirt, dust, or debris lodged in the charging port.
- The power adapter is damaged or faulty.
- The USB cable is no longer working properly.
- You are using the wrong power adapter for your phone, or a weak USB port.
Xiaomi Redmi 9A Charging Ways – Not Charging Problem Solution
In the below image we draw the Redmi 9a charging ways and its jumper check continuity using a multimeter if any track damage makes a jumper on the Xiaomi Redmi 9A motherboard.
- First, open the mobile
- Then clean the section of the charging connector of the mobile motherboard
- Then remove the old charging connector and add a new connector
How To Repair Xiaomi Redmi 9A Charging Problem:
Xiaomi Redmi 9A Charging Ways Charging Jumper Solution Slow Or Fake Charging Solution
After the mobile phone disassembles, you will need to take some steps shown in the diagram above.
Check the Charging jack and its points do they have good value if yes, then change the changer and check it and if the motherboard does not see the accurate value with the charging points, then after the dissatisfaction of the mobile phone you get something shown in the above diagram You have to take steps.
Below are the most common causes of why you Xiaomi Redmi 9A have trouble charging, and other problems concerning the battery like the grey battery issue:
- Shorted/faulty diode
- Shorted/faulty capacitors
- faulty resistors
- Bad/damaged charging coil
- Shorted/faulty IC
- Bad USB Port
- Partial contact
More information about this problem and solutions for new tips and tricks are going to this page, if there are new updates, there will be updates. Below are some related posts, you can read more about mobile phones.
