In this post we will show you the direct jumper solution of Realme 3 Display Light ways LCD Solution Backlight problem jumper solution, I will be showing you how to deal with display backlight related issues of the smartphone as using comes with loads of backdrops in the long run while we strive to get the best phone user experience we can possibly desire! Maintaining a lasting phone screen display calls for so much care and attention while using a smartphone.
Realme 3 problem no backlight on a mobile device is a common case, surely this will be the moment when we use a lot of activities using an Android phone device, in this opportunity MobileRdx Team try to discuss and Provide a repair solution on the Android device Realme 3 no backlight. Maybe some of you have the same obstacles and damage on Android phones Pocophone F1 that have no light on the display or its LCD.
What Is An Realme 3 Display Light Or Backlight?
To start with, an LCD is the digital display interface of your phone, it is the interactive part where you see what goes on as you operate or tap on an icon, watch a video, play music or games etc. When the LCD (liquid crystal display) is faulty or damaged, you one won’t be able to enjoy it as before. This is where the LCD backlight comes in, the backlight are series of LEDs (light-emitting diodes) well arranged and suited in the screen layers to give illumination to the LCD screen. When the LEDs are affected, chances are that the screen will go black-out, which means you won’t be able to see a thing! Display light issues are very common not just to Realme 3 but any other #Android phones in the market.
Realme 3 Display Light Ways Backlight Problem Solution
To fix the dark screen Realme 3 Display problem, you may first try to replace or install a new Display screen module, to easily confirm if the LCD’s backlight LED’s were still working or already damaged. You can also check the LED’s using the multimeter if you can manage without damaging the LCD flex connector. If the newly installed LCD still shows the same problem and the LED light doesn’t light up, refer to the solution below and locate the highlighted components on the PCB board.
Realme 3 Display Light Ways Backlight Problem Solution
Download Realme 3 Schematic Diagram And Service Manual From Here
To fix the dark screen Realme 3 Display Backlight way display problem, you may first try to replace or install a new Display screen module, to easily confirm if the LCD’s backlight LED’s were still working or already damaged. You can also check the LED’s using the multimeter if you can manage without damaging the LCD flex connector. If the newly installed LCD still shows the same problem, and the LED light doesn’t light up, refer to the solution above, and locate the highlighted components on the PCB board.
Steps To Repair Realme 3 Display Light Ways Problem:
“Note: Ensure that the Realme 3 Lcd is okay or try replacing it before proceeding.”
- Check the LCD for possible damaged, cracked or broken. Replace if necessary.
- Check the device firmware, and do a self-test and calibration method. update or flash the firmware.
- Check the LCD pin connector for possible damaged. Clean, re-solder or replace if necessary.
- Now Check Continuity between the Display connector to the resistor compounds. if any of then is track missing then make a jumper.
- If the above procedures don’t fix the problem the possible faulty is the main engine IC. Try to re-heater rework it.
If you have further questions, please don’t hesitate to leave a comment.
Note: Every repairing solution posted here was tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
