Samsung Galaxy A2 Core A260F ISP Pinout For Flashing FRP Bypass

ISP Pinout for the Samsung Galaxy A2 Core A260F and EMMC Point that can be used to Directly Read and Write the EMMC Memory by using the Supported box Like UFI & Easy Jtag. The EMMC Pinout image we share below is a tested file and fully working with UFI

Remove Pattern Lock, Screen Lock, Finger Lock in Samsung Galaxy A2 Core A260F with UFI Box you can easily solve with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged, your USB socket will not properly work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you.

Samsung Galaxy A2 Core A260F Overview

Samsung Galaxy A2 Core smartphone comes with a 5.00-inch touchscreen display with a resolution of 540×960 pixels and an aspect ratio of 16:9.powered by an octa-core Samsung Exynos 7 Octa 7870 processor. It comes with 1GB of RAM. it runs on Android 9.0 Pie (Go edition) and is powered by a 2600mAh battery.

What is ISP Or eMMC Pinout?

ISP orIn-system programming also known as in-circuit serial programming for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile. The eMMC solution consists of at least three components – the MMC (multimedia card) interface, the flash memory, and the flash memory controller – and is offered in an industry-standard BGA package.

Samsung Galaxy A2 Core A260F ISP Pinout Image

Usage of ISP Pinout :

Read/Write EMMC via ISP.
Read/Write EMMC via direct connect (EMMC installed in socket).
One-click boot repair via direct emmc connection.
Read MMC info (Many usefull info there such as read/write counter, error counter, etc)
Factory EMMC formatting.
Low EMMC formatting.
Master/Slave partition activation
EMMC smart repartition.
EMMC partition cloning.

How To Remove Samsung Galaxy A2 Core A260F Pattern FRP Using UFI Dongle:

• Remove the back panel of the device and connect the wire to the ISP Pinout.
• Next, connect the correct ISP Pinout to the UFi Box
• Check “Direct eMMC (ISP)”
• Then Click on “Identify eMMc.
• Connect your Samsung Galaxy A2 Core A260F  to the PC via a USB cable.
• Head over to the PC and open Device Manager.
• If your device is located there, run the UFi Box.

• Go to USERAREAPART
• Now Click on Special Task ► [Oppo] MasterClear ► Wipe Data Only
• Now Click on Special Task ► Clear FRP Lock
• Done.