Redmi Note 7 ISP is now available for download, by using this pinout you can remove Redmi Note 7 (Lavender) user lock FRP reset. You can easily get the ISP Pinout EMMC connection of the Redmi Note 7 by following the full guide below along with images. By using the ISP Pinout, you can easily bypass FRP lock or reset user data on your device via UFi Box, AE-tool or any other tool. Check out the below guide.
The Redmi Note 7 can be used to overcome some software problems on the Redmi note 7 phone, to direct it you can use a flasher box that has direct isp feature support and usually the flasher box can also be used for repairing emmc like Easy Jtag, Ufi, etc.
Remove Pattern Lock, Screen Lock, Finger Lock in Redmi Note 7 with UFI Box you can easily solve with this method if you are fresher technician or experienced technician in android software related if the error occurs of USB not recognized then your USB is not working.if a battery is not charged, your USB socket will not properly work and you will fail in this method. if any issues please write your questions in the comment box I will try my best to help you.
Redmi Note 7 Overview
Xiaomi Redmi Note 7 is powered by the Qualcomm SDM660 Snapdragon 660 Octa-core (4×2.2 GHz Kryo 260 + 4×1.8 GHz Kryo 260) processor. The smartphone comes with a 6.3 inches IPS LCD capacitive touchscreen and 1080 x 2340 pixels resolution. The screen of the device is protected by Corning Gorilla Glass 5.rear camera consists of a 48 MP (wide) + 5 MP depth sensor or 12 MP (wide) + 2 MP depth sensor lenses.
The front camera has a 13 MP sensor. The phone’s sensors include Fingerprint (rear-mounted), accelerometer, gyro, proximity, and compass.
The smartphone is fueled by a Non-removable Li-Po 4000 mAh battery + Fast battery charging 18W (Quick Charge 4).
What is Redmi Note 7 ISP Or eMMC Pinout?
ISP orIn-system programming also known as in-circuit serial programming for hardware that has a cross-reference of pins or contacts. By shorting the pins together, you can power or signal the logic board (motherboard) of an electronic device such as a mobile. The eMMC solution consists of at least three components – the MMC (multimedia card) interface, the flash memory, and the flash memory controller – and is offered in an industry-standard BGA package.
Usage of Redmi Note 7 ISP Pinout :
Read/Write EMMC via ISP.
Read/Write EMMC via direct connect (EMMC installed in socket).
One-click boot repair via direct emmc connection.
Read MMC info (Many usefull info there such as read/write counter, error counter, etc)
Factory EMMC formatting.
Low EMMC formatting.
Master/Slave partition activation
EMMC smart repartition.
EMMC partition cloning.
Vivo U10 ISP Pinout Image
How To Remove Redmi Note 7 Pattern FRP Using UFI Dongle:
- Remove the back panel of the device and connect the wire to the ISP Pinout.
- Next, connect the correct ISP Pinout to the UFi Box
- Check “Direct eMMC (ISP)”
- Then Click on “Identify eMMc.
- Connect yourRedmi Note 7 to the PC via a USB cable.
- Head over to the PC and open Device Manager.
- If your device is located there, run the UFi Box.
- Go to USERAREAPART
- Now Click on Special Task ► [Xiaomi MasterClear ► Wipe Data Only
- Now Click on Special Task ► Clear FRP Lock
- Done.
