Samsung Galaxy S2 I9100 Charging Ways Solution USB Jumper
Samsung GT-I9100 Charging Solution Not Charging Problem USB Ways USB Not Charging Problem Fake Charging
In this article, we will show you the steps on how to fix Samsung Galaxy S2 I9100 battery charging problems. Essential’s smartphone, Samsung GT-I9100, is packed with great features and garnered good user reviews. However, users have reported experiencing problems on their brand new phone, even without it ever being dropped or damaged.
Samsung Galaxy S2 Charging Ways Charging Jumper Here is the solution for Samsung Galaxy S2 I9100 Not Charging problem like there is No Charging indication shows on the display when the battery charger is being a plug-in.
This problem is may cause by a faulty charger or faulty components on Samsung Galaxy S2 I9100 PCB board. This problem may sometimes happen if the device suffered wet or water damaged or just exist.
Symptoms vary. In our experience, putting in the Lightning cable and attaching a charging plug often leads to a symphony of buzzing, but very little charging: it takes constant tweaking and balancing to get any charge at all. At others times nothing happens whatsoever, or it just feels like the cable doesn’t work. So what gives?
There are a lot of factors to consider as far as charging problem is concerned and it’s not really that easy to spot where the problem is. It is, therefore, necessary to use technical deduction when troubleshooting. It means that we will have to rule out one possibility after another and we will base that on the possible causes, such as…
Below are the most common causes on why you Samsung Galaxy S2 I9100 have trouble charging, and other problems concerning the battery like the grey battery issue:
- Sunken sockets on the device, or bent/ broken connector
- Factory-defective phone
- Defective battery
- Damaged charging unit or cable
- Defective phone
- Temporary battery issue
Hardware Solution:
Before doing, Be sure to check the battery and charger are Exactly working condition. then verify the phone’s USB pin connector is broken or any fault.
Check the charging (+) and (-) line paths are short using a multimeter, if it shows short them, remove/replace the diode, capacitors and filters. Also, replace the fuse. Note: Use these work at your own risk.
Check all the components shown in the image above.a
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Samsung Galaxy S2 I9100 Charging Solution Jumper Problem Ways No Charging Not Supported
