Lenovo A2010 Power Key Jumper On-Off Button Ways Solution
Here’s the solution to repair Lenovo A2010 power ON/OFF switch problem.
This problem may cause the device unable to power up when hitting the power key. The problem may easily configured if the power ON and OFF switch key has no response, but the device is not totally dead for it shows a charging indication when you charge it up. Now, this solution simply shows the line paths (ON OFF ways)of the power key.
If you are facing an power problem in Lenovo A2010 diagrams in this article can help. Continue with the following troubleshooting solutions and establish bridges necessary for the points that have been damaged.
Lenovo A2010 Power On Off Key Jumper, Track, Ways
The very first thing that you need to do is to check battery voltage at its terminals in order to verify whether the problem is with the battery or with anything else. (Battery voltage should be at least 3.8V).
If the battery voltage is lower than 3.8V or is not showing charge then it means you need to change your battery in first place and check.
If any of the on/off switch + or – track missing then make a jumper.
Lenovo A2010 Power Button Ways,On-Off Switch Jumper,Set Is dead Problem,Power Key Ways
If you have further Questions please leave a comment.
Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.
Lenovo A2010 ,Power Button,Power Key,Power Switch,On Off Button, On Off Switch, Powerr Problem
