Samsung GT-S5301 Power Button Ways Jumpers
Samsung Galaxy Pocket Plus S5301 Power On Off Button Ways
In Nokia Lumia 520 power button is soldered on the motherboard just like the volume keys. Power button is used to turn on and off your mobile phone and is placed on the right side of the mobile phone just below the volume keys. It is almost a fragile part because using it roughly can damaged it and if that happens there is good chance that the prints below the power button might also get damaged.
So if your Samsung GT-S5301 power button is not working to repair it you just need to replace it with a new one. If the prints of the button are damaged then you are going to have to make the jumpers as shown in the diagram.
Repair hints for Power Switch problem on Samsung S5301:
1. Check the power switch assembly, if the assembly is damaged replace the switch.
Sometimes even if the powerswitch is not not visually damaged, see to it that it still working by using a
multimeter
2. For lifted button switch solder terminal pads on the PCB board, manage to re-establish the switch to its original position and bond it perfectly so that it won’t easily break. Then manage to reconnect the power switch line paths and the ground connection. If you can see an empty components solder pads just below of it, you can connect it to that spot. that is also connected to the power switch.
Samsung Galaxy Pocket Plus S5301 Power Button Ways, Samsung GT-S5301 On Off Key Jumper Solution, Set Is Dead Problem
Samsung GT-S5301,Power Button,Power Key,Power Switch,On Off Button, On-Off Switch, Power Problem
