Nokia C2-01 Handsfree Jumper Ways Headphone Problem Solution
Here’s the solution for Nokia C2-01 in fixing Headphone symbol problem. If something went wrong like if there is no sounds can be heard if the handsfree or loudspeaker is being activated, this solution might help for your repair.
Problems
No Sound in ear phones.
Always Shows Headphone symbol.
Distorted sound in ear phones.
Unbalanced sound in ear phones.
Reasons of Problems
The problem might be in the Audio Jack of your phone, you might need to replace Audio Jack.
Volume settings might be low or there might be a problem in your headset.
Dry soldering of Audio Jack contact pins or any kind of water damage might also have damaged your audio jack on-board connector.
Workaround
Check your phone’s volume settings and check.
Restart your phone and check.
Check with any other working headset in order to verify the actual cause of problem.
Nokia C2-01 Headphone Symbol Hardware Solution
Clean Audio jack contacts with the help of a cotton cloth and check.
Re-solder all the pins of Audio Jack and check, as sometimes it becomes dry solder or soldering comes off due to any kind of physical damage. Also check for traces of water damage and clean it.
If the above mentioned steps fail then replace your Audio jack with a new / working one.
All above method fails then make a jumper like below diagram.
All the above methods will surely solve your problem, but make sure that you check the status of your Audio Jack after every step you perform, as it might be able to solve that problem.
If you have further Questions please leave a comment.
Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.
Nokia C2-01 Headphone Mode Activated, Headphone Ways, Jumper, Handsfree Solution, Handsfree Ways, Not Working Problem.
