Samsung E1200T Keypad Hang Problem Ways Solution

Samsung GT-E1200T Kepad Jumper Ways, Keypad Hang Problem Repair Solution
This solution covers for hardware level of repair for Samsung E1200T Keypad Problem and Also you will find Samsung E1200T Keypad Ways and Jumpers information in the diagrams in this article.

Just see the solution preview below for it shows which components needs to be check and replace if the there is No Keypad Working on phone or Keypad problem of the Samsung E1080 goes wrong.
This solution may help if you already done a software calibration method and tried replacing the Keypad membrane but the problem continues.

Do these solutions step by step.
This solution may help for a water or wet damaged and accidentally, heavily dropped phones.
The Problem occur because of faulty Keypad membrane or bad it’s connection to the Mobile Phone’s PCBA Motherboard.

You Can Use any cleaning liquid for this purpose like CTC or any other you prefer.

Please Note that we will edit these solutions or add new ones if found in this page at any time in the future.So feel free to come back any time on this page to stay up to date.

Here is the Solution for Samsung GT-E1200T Keypad Hang Problem Ways.

Samsung E1200T Keypad Jumper Ways Solution

Hints to fix Samsung E1080 Keypad Problem Repair Solution:
Check/clean the keypad PCB matrix.
Clean/replace the keypad membrane..
If you have keypad hang problem change coil as shown in first image of this post.

If you have further Questions please leave a comment.
Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You