Samsung GT-B5330 Power Key Ways On-Off Button Jumper Solution
Here’s the Samsung Galaxy Chat B5330 solution for lifted and damaged ON and OFF power switch problem. This solution is helpful to reconnect the cut-off power switch line paths that resulted to “unable to turn the device power ON”.
For some reason the power switch terminal solder pads may also been severely damaged and lifted by the users., In order to fix this problem we need to bond the power switch to its original position so that it won’t easily break. But the problem is, we cannot apply a solder on its terminal because the solder pads was already been lifted. To avoid hassle digging the PCB board you can refer to this solution below to locate which particular components where we can apply and mend a jumper wire to reconnect the said open line path of the power switch connection.
When it comes to hardware, the very first thing that you need to do is to re-solder power button strip and check its on-board connector for any loose contacts.
If the above method not working replace new power button strip.
Check power switch connection line paths accross to each components where it is being connected.
If any of the on/off switch + or – track missing then make a jumper.
Samsung Galaxy Chat B5330 Power Button Ways,Power Problem Solution,On/Off Key Jumper,Power Key Ways.
If you have further Questions please leave a comment.
Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.