Nokia X2-02 Display Light Solution Lcd Light Jumper

Nokia X2-02 Display Light Solution Lcd Light Jumper

Nokia X2-02 Display Light Solution This solution below shows the Nokia X2-02 LCD display backlight components  that holds and control for the LCD screen display backlight to glow. If one of these components may become faulty due to wet or water damaged it will result to LCD’s backlight failure.

You may need to trace the connection line tracks, supply voltages and check some of the Backlight LED driver components shown on the solution above. You may start to check the highlighted components for it is more prone to be easily damaged when a short circuit occurred. Check and replace if already found damaged.
Solution for Nokia X2-02 Not working LCD display backlight LED White Display Problem

If the newly installed LCD still shows the same problem, refer to the solution below and locate the highlighted components on the Nokia X2-02 PCB motherboard. These components holds and control the LCD LED backlights to work.

Please Note that we will edit these solutions or add new ones if found in this page at any time in the future. So feel free to come back any time on this page to stay up to date.

Hardware Solution:

Here’ how to troubleshoot the Nokia X2-02 Display problem:

For quick fix, on minor problem like if the phone status shows no indication of being wet by any liquid, free of oxidation build up or the PCB board is still clean.
– Check the Flex ribbon cable wire.. replace if damaged.
– Check/ try to replace the LCD screen, the white LED’s on it may already been busted.

Just refer to the solution below, this may help in solving backlight white LED problem on Nokia X2-02 after you confirmed that the LCD screen is okay or already tried replacing it