Samsung Galaxy Tab 4 T231 Charging Ways Usb Jumper
Samsung SM-T231 Charging Solution Jumper Usb Problem Ways
The picture below shows the Samsung Galaxy Tab 4 T231 basic components needs to check if the phone somehow doesn’t charge if the wall charger is plug-in. But you may first ensure that the wall charger and the phone’s battery you are using are still working. A drained battery will not charge, try to plug the battery charger around an hour or try to replace it with a good one, to quickly check if the battery got the problem.
So if you are experiencing any charging problem or problem connecting your Samsung SM-T231 to your computer via USB cable then it is possible that your Samsung T231 charging connector is faulty. Replacing it with a new one is the only solution here. But if by any chance the USB connector prints are broken then you have to make the jumpers as shown in the diagram below.
Here are Samsung SM-T231 USB Connector ways problem solutions. Please study these diagrams very carefully before you start repairing.
Now re-solder charging connector pins and check.
Check charging voltage with the help of multi meter. Place Negative terminal of multi meter on ground and Positive on a charging pin (1st pin from your left-hand side).
Make sure that the voltage is between 5V to 5.5V, if it is not then replace charging connector.
All of the above steps will surely help you to resolve your Samsung Galaxy Tab 4 T231 charging problems in the best possible manner. If you are lucky enough then simple workaround method will get the job done for you.
If you have further Questions please leave a comment.
Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You.
