Sony Xperia Z Ultra LCD Display IC Solution Jumper Problem Ways
Here’s the Sony Xperia Z Ultra Display Screen Problem solution for hardware repair. If the play goes wrong and shows like blank or empty screen, white screen, blue screen, saturated, garbled and blurry etc.
We show you a basic info on how to fix and solved the problem.
This solution may only works if the LCD is not damaged, cracked or broken.
play problem like blue or white screen, is caused by a corrupted firmware and can be fixed by restoring, flashing, updating the the phones firmware.
If however if the firmware confirmed okay but the problem still exists, therefore the problem may possibly lies on a faulty hardware components. In Sony Xperia Z Ultra there is no ESD/EMI filtering IC is used or mounted in the circuit. A play problem hardware troubleshooting on it, is a little bit risky. For you only have a few options to the components that needs to check or replace and after that the CPU is at stake to work at.
Repair Hints for Nokia Sony Xperia Z Ultra LCD play problem:
1. Try replace the LCD screen first.
2. Try to restore, flash/update the firmware.
3. Visually check the LCD pin connector, if oxidized, clean it.
4. If the above procedures doesn’t fix the problem Remove Fuse And Make Jumper As Shown In Above Image.
Please Note That Sony Xperia Z Ultra Also known as C6802, Sony Xperia Z Ultra LTE C6806, Sony Xperia Z Ultra LTE C6833, C6803
Sony Xperia Z Ultra LCD, Display, Solution, Jumper, Problem, Ways
Sony Xperia Z Ultra LCD Display IC Solution Jumper Problem Ways LCD Display Not Working
Sony Xperia Z Ultra C6803,LCD Display Jumpers, Display Ways, White Display, Blinking Display, Blank Display
