Xiaomi POCO X6 5G Test Point – Reboot to EDL Mode 9008

Xiaomi POCO X6 5G EDL Point is a hardware-specific ISP pinout or test point used to enter the device into the EDL mode (9008) for flashing firmware, unlocking, or repairing. If your Xiaomi POCO X6 Qualcomm phone is bricked, you have forgotten the pattern lock, or you cannot unlock FRP, then the Xiaomi POCO X6 5G EDL Test Point can help you quickly fix it.

What is the Xiaomi POCO X6 5G EDL Mode

The EDL mode (Emergency Download Mode) can connect Qualcomm Android phones to computers via the Qualcomm HS-USB QDLoader interface. To boot into the EDL mode, you must short two test points on the device’s motherboard or use a unique tool to which the device’s bootloader has granted permission. Nowadays, Android devices manufactured by Qualcomm come with locked USB drives and bootloaders. Without authorization, the device cannot be booted into Download mode. To boot into the EDL (Emergency Download Mode), you must use the EDL Point.

Xiaomi POCO X6  EDL Point (Test Point) Pinout Image

How to Reboot to EDL Mode 9008 on Xiaomi POCO X6 5G

Here we provide Fastboot, ADB, and Test Point Methods to boot your device into EDL Mode carefully. So, follow the below methods to successfully Reboot your Xiaomi POCO X6 to EDL 9008 Mode

• On your computer, download and extract the Qualcomm USB Driver
• Download and install the Qualcomm USB driver
• Turn off your Qualcomm Android device by pressing the power button
• Take off the phone’s back cover
• Check out the image below
• The EDL PinOUT/Test Point can be found on the circuit board of your phone
• To short that pinout, you need copper wire or tweezers

• Connect your smartphone to the PC using a USB cable once you’ve finished
• That’s it,
• You can now use any unlocking or flashing tool for Qualcomm to fix your phone.

Other Ways to Enter EDL Mode on Xiaomi POCO X6

Follow the instructions below carefully to boot your device into EDL Mode (aka Emergency Download Mode)

Using Adb Mode

• First, install ADB & Fastboot driver on the PC and then turn on USB debugging on your phone.
• Now connect your device with a PC using a USB Driver.
• Then open a command window on your PC, paste the following commands, and hit enter.

adb reboot edl

• If any pop-up appears on the phone screen, then allow ADB access.

Fastboot mode

• Download ADB and Fastboot Tool and extract it in your PC (C:/ Drive)
• Boot your device into the bootloader
• Open the command window on your PC on the same folder extracted (ADB and Fastboot Tool)
• now enter the command

   .\fastboot oem edl 

Note: It’s important to understand that EDL mode flashing is a universal method for all Moto devices. However, the EDL booting process may vary for different devices. For some devices, you can use the EDL boot command. The problem is that the EDL command doesn’t work for all the latest Motorola smartphones. Therefore, using the test point is the easiest and most reliable method to boot any Motorola phone into EDL mode using the test terminal.

Uses Of Xiaomi POCO X6 5G Test Point

• Reviving a bricked device through firmware flashing
• Overcoming FRP lockout after factory reset
• Unlocking the device after forgetting the pattern lock
• Installing custom firmware for improved performance and customization
• Debugging and testing hardware and software for issue resolution by technicians and developers.