Redmi Note 8 Charging Problem Solution – USB Ways

Looking for Redmi Note 8 Not charging problem solution usb ways? well, it is hoped that this article will help you out in the quest here. A charging problem will usually make it impossible for you to charge your phone.  Its even more annoying when you have a non-removable phone battery which makes it impossible to charge your phone with the universal charger alternative.

Redmi Note 8 USB charging problems just like any other phone can be traceable to certain possible causes which we shall be looking at and how to tackle them correctly so as to achieve best result.

Possible Causes Of Redmi Note 8 Charging Problem

1. Shorted/faulty diode
2. Shorted/faulty capacitors
3. Faulty resistors
4. Faulty IC (integrated circuit)
5. Bad USB Port/Cable
6. Partial contact

Haven considered all the above possible causes of a phone’s USB charging problem like the Redmi Note 8 USB Charging Solution which we are considering now, the information should be able to help you with a possible way out of this unpleasant circumstances.

Redmi Note 8 Charging Ways Not Charging Problem Solution:

In the below image we draw the Redmi Note 8 charging ways and its jumper check continuity using a multimeter if any track damage makes a jumper on Redmi Note 8 motherboard.

1. First, open the mobile
2. Then clean the section of the charging connector of the mobile motherboard
3. Then remove the old charging connector and add a new connector

After doing this, but the mobile phone in charge once, After doing these things, if the mobile is solved then fitting the mobile, If the problem is not solved after doing these, then I have given a picture below to do the job.

Causes Of Redmi Note 8 Charging Problems:

1. Exposure To Water: Water is a conductor of electric current which has the ability to cause any of the above component parts to become faulty or even damaged beyond repairs.
2. Bad Chargers: OEM (original equipment manufacturer) chargers are the best chargers for a smartphone. The generic ones that do not meet standard specifications potentially damages a phone’s charging system.
3. Ageing Factor: Ageing is a constant with any electronic gadgets, the components parts that forms the charging system can become less functional and even worse with time as they do have submission to the law of diminishing returns and would therefore need to be replaced subsequently.
4. Excessive Voltage/current: The both cannot be separated in the process of charging a phone, most phone chargers fall between 5.0 volt, 500mAh and 5.0 volt, 2000mAh specification etc. It should be noted that using a charger that supplies voltage/current more than what is required can be very detrimental to a phone’s charging system.
5. A Hard Fall: The component parts are solid state based, thus a hard fall will potentially if not immediately cause a USB charging problem amongst other likely occurrences like earpiece problem, mouthpiece problem,  network problem, screen problem. Unlike software level repair that requires you mostly flashing a phone, in hardware case you will have to troubleshot manually in order to locate the cause of a problem.