Oppo A7x User Lock Remove Delete Screen Password Using MRT Dongle [Testpoint Method]
Here is the method Remove OPPO A7X Password By MRT Dongle Software, this is very good software to remove password, and Bypass FRP from your android devices, you only need to download and install this software in your computer, and after that connect device to the computer and then just Remove Password, and Bypass Google Account easily.
This Models Was Not Supported After Ota Update A3x A2x With Mrt Tool We Found New Method For Unlock By Tp Short Method Tested By Team
Note : This Work With Last 2.60 Setup!
How To Remove Oppo A7x User Lock And Screen Password?
Disassemble Phone Open Screw Warrnty May Be Void Open Sticker Foil Protected On Cpu And Ram Find Resistor According Photo Short It With Gnd Connect Cable And Wait Mtk Port Appear Start Operation Battery Connected Need
Note This Is Not Update This Just Shared Tricks In This Nothing World 1st And Last
Concept Behind MRT Dongle:
As we all know MRT Dongle is one of the best mobile flashing tool. User can use this amazing tool to perform many tasks [Mobile Related].
But the main problem is that most of the latest Oppo phones come with pre-locked bootloader. So it’s really hard to bypass Pattern or reset Userlock , if the bootloader is locked. On that condition, you have to boot the Oppo locked device into TPmode or emergency downloading mode.
Bypass User Lock From Oppo A7x Using MRT Dongle Unlock Tool:
Oppo A7x Test Point:
Once the device booted into MTK Testpoint mode, use MRT Dongle to remove Oppo A7x User Lock
- Download MRT Dongle Unlock Tool from here. [DOWNLOAD]
- Extract the downloaded MTK Special Tool and run as administrator.
- Wait to launch
- MTK Special Tool properly.
- Click on “Start Button” option from below.
- Now short oppo A7x test point to the ground
Device may take long time to reboot after applying the mi account removal process. So sit back and wait for normal boot.
Oppo A7x User Lock Remove Logs:
Disconnect Mobile…
Re-Put the Mobile Bettery…
Then Connect your Phone to Computer again….
Please Make sure Mobile better has Power…
Searching Mobile Port…
Get Mobile Port is: COM32
Device driver identification:
MediaTek USB Port
Mobile Has Connect…
CPU_NAME: MT6771
Reading Mobile Hardware Info…Success
HW_Inf: 8A00 SW_Inf: CA00
Initialization Mobile …>>> Sending Auth File To Mobile…Success
Downloading Boot1 To Mobile Phone…Success
Mobile phone status:SYNC…
Mobile phone status swtich to :brom…Success
Make sure Mobile status has in :brom…
Init Mobile BOOT2 …
=====================Flash Type(eMMC)==============
Flash Size: 0x0000001D1EC00000 -> 119276M
Flash ID: 0x150100445636444D
Flash Name: Samsung_Unknow
Flash symbol: DV6DMB
Reading Mobile Map Data…Success
Writeing Mobile data userdata …
Corresponding operation completed!!!
