Samsung Galaxy J2 Prime G532M Power Button Ways Solution
Samsung SM-G532M Power Button Jumper On-Off Button Ways Solution Power Button Not Working Problem
One of the common issues plaguing Samsung Galaxy J2 Prime G532M owners is the inability of the device to turn itself on from time to time. This issue can be due to a few factors and can manifest itself in a few different ways. Below are some of them.
Here’s the jumper ways solution for Samsung Galaxy J2 Prime G532M ON and OFF switch if the handset device showed charging indication when the battery charger is a plug-in but unable to power up when the power button is being pressed.
Besides that, a problem in power button might also cause your phone to restart at times, which becomes very much annoying and it troubles you to the masses.
In the following lines you will get to know about Samsung G532M power button problems as well as their solutions:
Workaround
For Samsung G532M power button problem there is no workaround method, however, you can try using a pin and move it all around the Samsung Galaxy J2 Prime G532M power button, as this might be able to take away some stiffness from your power button.
Samsung Galaxy J2 Prime G532M Power Switch Hardware Solution
The two upper or legs of the power switch are connected to the PCB’s ground lines.
The other two which is in lower is the power switch line paths, just locate the test spots as shown on the solution above where to apply a jumper to reconnect its connection.
If you have further questions please don’t hesitate to leave a comment.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Samsung Galaxy J2 Prime G532M, Power Button, Power Key, Power Switch, On-Off Button, On Off Switch, Power Problem
