Nokia 105 RM-1134 Full Keypad Ways Solution Jumper
Nokia 105 Keypad Not Working Problem Repair Solution Full Keypad Ways Buttons Not Working Solution
Here’s a solution that may work to solve Nokia 105 RM-1134 keypad malfunction or not responding.
This solution may help as a guide to repair certain keys that do not work when being pressed. If the device suffered wet or water damaged or any means of liquid most oftentimes that keypad may stop working due to some short circuit occurred and or oxidation may build up due to liquid residues.
If this happens you may need to clean first the keypad membrane and contact pads using a liquid cleaner.
Nokia 105 (2015) Dual SIM The phone comes with a 1.45-inch display with a resolution of 128 pixels by 128 pixels.
It comes with 4MB of RAM. that cannot be expanded. As far as the cameras are concerned, the Nokia 105 (2015) Dual SIM packs a No primary camera on the rear
The Nokia 105 (2015) Dual SIM runs Series 30+ and is powered by a 800mAh removable battery. It measures 108.50 x 45.50 x 14.10 (height x width x thickness) and weighs 69.60 grams.
Just see the solution preview below for it shows which components need to be check and replace if the there is No Keypad Working on phone or Keypad problem of the Nokia 105 goes wrong.
This solution may help if you already did a software calibration method and tried replacing the Keypad membrane but the problem continues.
Do these solutions step by step.
This solution may help for a water or wet damaged and accidentally, heavily dropped phones.
The Problem occurs because of faulty Keypad membrane or bad it’s connection to the Mobile Phone’s PCBA Motherboard.
You Can Use any cleaning liquid for this purpose like CTC or any other you prefer.
Please Note that we will edit these solutions or add new ones if found in this page at any time in the future.So feel free to come back any time on this page to stay up to date.
Nokia 215 Keypad Jumper Ways Solution
Hints to fix Nokia 105 RM-1134 Keypad Problem Repair Solution:
Check/clean the keypad PCB matrix.
Clean/replace the keypad membrane.
If you have keypad hang problem change coil as shown in the first image of this post.
If you have further Questions please leave a comment.
Note: Please note that even though every solution posted on our website is tested by one or more members of our team before posting, but still we do not take any responsibility for any damage it may cause to your cell phones. Use these repairing solutions at your own risk. Thank You
